Welcome to CubChat - The Forum For Honda Cubs (and Similar Motorcycles)
RE: GEARS SLIPPING BACK INTO 2ND
Posted by : Fuzz Ashford Kent (86.14.252.127) Inappropriate or SPAM?
On Thursday 13/09/12 at 23:10:57
Clean out the gauze filter in the lower part of the casing.
Clean out the centrifuge of all the rubbish that collects.
On reassembly, drain petrol, remove battery & lay the bike down to make it easier.
IF reusing the gasket & any sort of sealant , use Hylomar or a TINY amount of sealant as it WILL get into your oilways.
A dab of grease helps to hold the ballbearing plate in position, don't omit the spring or spacer out either !!!
This may help.....
http://members4.boardhost.com/johnmer/msg/1178467607.html
http://members4.boardhost.com/johnmer/msg/1313259829.html
Please ask if you need any extra help
Message Thread:
Back to main forum
Sorry, this post has timed out and can no longer be responded to (feel free to blame spammers).
If there are more recent replies, you might still be able to reply to those!
Just a counter down here...